🔧 Complete Specs Included
Front Brake Pad Replacement on 2012-2015 Toyota Camry
Swap front brake pads on 7th Generation Camry. Features caliper guide pin and bracket torque specifications. Mapped specifically for 2014 Toyota Camry SE (2.5L I4 (2AR-FE)).
⚡
RECOMMENDED EXACT FIT PART
Verified compatible with your 2014 Toyota Camry SE (2.5L I4 (2AR-FE))
Akebono Akebono ProACT Ceramic Brake Pads (ACT1211)
Compound / Spec matching OEM standard. Highly recommended for DIY replacement.
Step 1
Elevate and Remove Wheel
Loosen the lug nuts. Jack up the front of the vehicle and support it with jack stands. Remove the wheel nuts and lift off the wheel.
🔧 Fastener: 21mm Wheel Lug Nuts • Torque Spec: 76 ft-lbs
Step 2
Remove Caliper Pins & Pads
Unbolt the two 14mm caliper guide pins. Slide the caliper off and secure it with a hanger. Remove the old pads and hardware clips.
🔧 Fastener: 14mm Caliper Guide Pin • Torque Spec: 26 ft-lbs
Step 3
Install New Hardware and Pads
Install new steel clips. Apply high-temp grease to pad slider ears. Squeeze caliper piston back, fit new pads, and reinstall caliper.