Home / Specifications / 2013 Jeep Wrangler Sport (3.6L Pentastar V6) Torques
5 Verified Fasteners

2013 Jeep Wrangler Fastener Torque Specifications

The complete directory of factory-authorized torque settings, bolt head socket sizes, and tightening sequences for the 2013 Jeep Wrangler Sport (3.6L Pentastar V6) (3rd Generation (JK)).

📖

DIY Repair Guides

Step-by-step procedures, timing, and beginner instructions.

 🛢️

Fluid Capacities & Viscosities

Exact fluid capacities, weights, and oil specs.

🛠️ Essential Tooling: Calibration is Key

Fasteners can snap or warp if over-torqued. Always use a calibrated, high-precision torque wrench. We recommend these verified options for perfect alignment:

Shop Click Wrench Shop Digital Wrench

📁 Engine Oil & Filter Change

2 Fasteners
Fastener Torque (ft-lbs) Torque (Nm) Head Size
Critical Oil Pan Drain Plug
20 ft-lbs 27 Nm 13mm hex
Critical Oil Filter Cap Casing
18 ft-lbs 25 Nm 24mm hex

📁 General Maintenance / Chassis

3 Fasteners
Fastener Torque (ft-lbs) Torque (Nm) Head Size
Caliper Guide Pin Bolt
26 ft-lbs 35 Nm 13mm hex
Caliper Bracket Mounting Bolt
120 ft-lbs 163 Nm 21mm hex
Wheel Lug Nuts
100 ft-lbs 135 Nm 19mm hex