Home / Specifications / 2012 Toyota Camry SE (2.5L I4 (2AR-FE)) Torques
8 Verified Fasteners

2012 Toyota Camry Fastener Torque Specifications

The complete directory of factory-authorized torque settings, bolt head socket sizes, and tightening sequences for the 2012 Toyota Camry SE (2.5L I4 (2AR-FE)) (7th Generation).

📖

DIY Repair Guides

Step-by-step procedures, timing, and beginner instructions.

 🛢️

Fluid Capacities & Viscosities

Exact fluid capacities, weights, and oil specs.

🛠️ Essential Tooling: Calibration is Key

Fasteners can snap or warp if over-torqued. Always use a calibrated, high-precision torque wrench. We recommend these verified options for perfect alignment:

Shop Click Wrench Shop Digital Wrench

📁 Engine Oil & Filter Change

2 Fasteners
Fastener Torque (ft-lbs) Torque (Nm) Head Size
Critical Oil Pan Drain Plug
30 ft-lbs 40 Nm 14mm hex
Critical Oil Filter Canister Casing
18 ft-lbs 25 Nm 64mm 14-flute

📁 Front Brake Pad Replacement

3 Fasteners
Fastener Torque (ft-lbs) Torque (Nm) Head Size
Critical Caliper Guide Pin Bolt
26 ft-lbs 35 Nm 14mm hex
Critical Caliper Bracket Mounting Bolt
79 ft-lbs 107 Nm 17mm hex
Critical Wheel Lug Nuts
76 ft-lbs 103 Nm 21mm hex

📁 General Maintenance / Chassis

3 Fasteners
Fastener Torque (ft-lbs) Torque (Nm) Head Size
Caliper Guide Pin Bolt
26 ft-lbs 35 Nm 14mm hex
Caliper Bracket Mounting Bolt
79 ft-lbs 107 Nm 17mm hex
Wheel Lug Nuts
76 ft-lbs 103 Nm 21mm hex